Thermoelectric coolers (TECs) provide compact, solid-state, and refrigerant-free cooling, but their performance depends strongly on the geometry of the thermoelectric (TE) legs. This work investigates, through a three-dimensional COMSOL Multiphysics finite-element model, the influence of the leg shape on the performance of a bismuth-telluride-selenide (Bi2Te2.70Se0.30) TEC. Four leg geometries (trapezoid, cuboid, cube, and hourglass) were compared under identical boundary conditions, with a load resistance of 0.42 Ω (matched-load condition) and a hot-side temperature of 300 K, through the electric potential, the temperature field and gradient, the current density, the total heat source, and the electric energy density. The leg geometry has a decisive effect on the coupled electro-thermal behaviour. The trapezoidal leg, whose cross-section narrows toward the hot side, performs best, reaching a maximum temperature difference of about 58 K, with the highest electric potential (0.0858 V) and current density (1.04 × 10⁷ A·m⁻²) among the four shapes. The hourglass is intermediate at about 48 K, whereas the cuboid and cube give smaller differences of 40 K and 30 K. The coefficient of performance follows the reverse ranking, with the cube achieving the highest COP and the trapezoid the lowest due to its greater Joule dissipation. The trapezoid nevertheless achieves the highest temperature lift, reaching approximately 58 K, with cooling performance decreasing as the applied cooling load increases. These results show that tapering the leg cross-section toward the hot junction is an effective, material-independent strategy for enhancing TEC performance.